Skip to content

Schedule

The Schedule page plans shoot days on a stripboard: a day rail on the left, the selected day’s timeline in the center, and a roster panel on the right.

Open a project and click Schedule in the sidebar.

  • Create: click Add Shoot Day, set the Date (defaults to today) and an optional Label (defaults to the next day number), then click Add day. Only one shoot day per calendar date is allowed; a duplicate date shows “A day already exists on that date.”
  • Select: click a day in the Shoot Days rail. Each day is a card: the day number in the day’s colour, the date (with Today on today’s), the day’s name, then Call (or Not set), Scenes (how many scenes are on the day) and Weather (the high and low, or None), and under them the day’s first location and how many more follow. The weather is the same forecast the project overview shows for that day and place, for days from today to 13 days ahead; Data: at the foot of the rail names the weather sources. A day further out shows no weather yet, and a past day shows the last forecast saved for it.
  • Edit: open a day’s three-dot menu to change Date, Label, and General call, then Save. General call opens the time picker: drag the ruler, use the arrow keys (5 minutes, or 15 with Shift), or click the large time and type one.
  • Delete: the same menu’s Delete, confirmed by the Delete shoot day? dialog. The day’s shots become unscheduled.
  • Days are numbered by date order: Day 1 is the earliest date. To reorder days, change their dates.
  • Add scenes: click Add scene, search, and pick a scene. Its unscheduled shots are added to the day. If shots are added to a scene later, the strip shows a notice with an Add to day button.
  • Scene strips show the time range, scene number and name, INT/EXT and time of day, location, page count, and shot count. Expand a strip to see its shots, adjust per-shot durations, and use each shot’s menu (Remove from day, Move to day, Copy to day).
  • Strip actions: the strip’s menu offers Move to day, which moves the strip and its shots to the end of the day you pick. On a split scene every part has its own Move to day and moves on its own, keeping its shots. The bin button removes the strip from the day, and its shots become unscheduled.
  • Reorder: drag strips and blocks to set the day’s running order. Times recalculate from the general call time; the day ends with an Estimated wrap row and totals (shots, pages, shoot time).
  • Split a scene into parts: to put a block inside a scene, drag the block between two of the scene’s shots, or open a shot’s menu and choose Split scene before this shot. The scene becomes Part 1 of 2 and Part 2 of 2, each with its own times and shots, and blocks can sit between the parts. You can also drag a shot out of a strip and drop it on another strip or block in the day. If the shot shares its part with other shots, the scene splits and a new part holding that shot appears in front of the row you dropped it on. If the shot is the only one in its part, nothing splits: that part itself moves to where you dropped it, and for a scene that is not split, the whole scene moves. The caption under the dragged shot says which will happen: Pull out into a new part here for a split, or Move before or Move after followed by the row it lands next to, such as Move after Lunch, for a move. A shot cannot be dropped onto a shot of a different scene. Drag a shot from one part onto a shot in another part of the same scene to move it between them (the caption reads Move into and the part’s name); it lands in front of the shot you dropped it on, and the order inside both parts is kept. Moving the last shot out of a part closes that part. The scene’s original strip is the exception: its last shot cannot be moved into another part, because the whole scene hangs off it and the other parts would go with it. The caption shows Cannot drop here. Rejoin the parts first, or move a different shot. Every part’s menu offers a rejoin: the first part has Rejoin with next part, and every other part has Rejoin with previous part. The two parts become one, in the place of whichever of them came first, so a part that sits above a block stays above it. This works whichever part is the scene’s original strip, including when a part has been dragged above it. Removing a part unschedules only that part’s shots, and says so in the Remove this part? dialog. Removing the scene’s original strip removes the whole scene from the day, every part included. Every part carries the “shots added since this scene was scheduled” notice and its own Add to day, and each one adds the new shots into that part. The scene’s coverage count and page count sit on the first part, so the day totals count the scene once. If a part has been dragged above the scene’s original strip, that part is the first one and carries both. Move to day on any part moves only that part, with its own shots. Moved to a day that already has part of the same scene, it stays a separate part there, so the two never join unless you rejoin them. Moving the scene’s original strip leaves the scene’s other parts where they are. On a day that has a split scene, adding a scene, dragging or copying a shot in from another day, and adding a Quick blocks block all land at the end of the day rather than inside a split scene. The one exception is a shot, or a scene added to the day, that already has a strip on that day: it joins the scene’s original strip. A part moved there with Move to day does not join; it stays its own part. The schedule PDF lists each part in order, headed “Scene (part 1 of 2)”. A callsheet shows one schedule row per part, headed “Scene, part 1 of 2”, each with its own times, its own shots and its own shot count; the scene’s page count sits on the first part, so the day’s page total counts each scene once, and a description you write on one part stays on that part. The callsheet in the editor, its PDF, the shared link and Viewing published version inside CineFlow all show the same rows. The “shots still to place” note stays on this page and is not printed on the callsheet.
  • Blocks: click Quick blocks to insert Bump In, Crew Call, Cast Call, Lunch, Dinner, Company Move, Bump Out, or Est. Wrap, or choose Custom Block to define your own (Block type, Label, Duration, Icon, Color, and Save as reusable preset for your own presets list).
  • Locations through the day: Starts at, above the day’s first block, says where the day begins. A Company Move block has Set destination, and everything after the move happens at that place, up to the next move. Both list the project’s saved locations first, then the locations already on the day, with a search for a new address below. A new address joins the project’s saved locations, and an address one of them already has picks that one rather than adding it twice. Once a move has a destination, each block shows the location it is at, and dragging a move changes the order. A block after a move with no destination shows no day location. Clear destination in the same list takes it away. A location you are replacing stays on the day if it has parking, hospital or description details, so nothing you wrote is lost; remove it from the Locations tab if you no longer need it.
  • Open route: beside Starts at, Open route hands the day’s locations, in the order the day visits them, to your maps app for driving directions. It uses each location’s map position when it has one and its address otherwise. A location with neither is left out, and the menu says how many. Only places of the kind Location are stops: Base, Parking, Hospital and Other are not. Once a Company Move has a destination, the stops are where the day starts and the places the moves go to. Where both apply, a small menu offers Google Maps and Apple Maps: Apple Maps appears on an iPhone or iPad with iOS 18.4 or later, and on a Mac with macOS 15.4 or later when the browser says which macOS it runs (Chrome and Edge do; Safari and the desktop app do not, so they offer Google Maps only), because older versions cannot show a route with more than one stop. Google Maps takes up to nine stops between the first and the last (three on a phone or tablet), so a longer day, or one whose addresses are too long for a single Google Maps link, is split into parts, such as Google Maps, stops 1 to 5 and Google Maps, stops 5 to 8, each starting where the last one ended, and no location is dropped. A day with one location gives directions to it from where you are, and a day with no locations shows no button. In the desktop app the route opens in your maps app or browser, not inside CineFlow. On a phone, each day on the schedule has its own Open route.
  • Multi-select: Cmd or Shift click shots to select several and drag them together.

The Roster drawer has Cast, Crew, and Locations tabs for the selected day.

  • At the top sit the day’s date and name and its Call. Editors change the day’s general call there, with the same time picker.

  • On Cast and Crew one line sums up the day’s weather, the same forecast as the rail and the project overview. Click it to open Locations.

  • On Locations a Weather card shows the day’s forecast at its place, hour by hour, with rain and wind and the sources it comes from. The pencil on the card (Add weather or Edit weather) types weather by hand, which wins over the forecast. When the day has more located stops, each one has a weather card of its own.

  • Add cast / Add crew: search project people and assign them to the day. People marked unavailable ask for confirmation before assigning.

  • Each person is a card with their photo, name, and character or role. Manual marks someone added by hand rather than through the schedule, and the card shows their availability and call time. The call time is marked Auto when it comes from the earliest scheduled scene, or Day when it is the day’s general call. Click a call time to change it.

  • Click a cast card for Character, HMU, Pickup, On set, Wrap, Status (Start, Work, Hold, Finish, Start/Work), Notes, and Remove. Click a crew card for Role, Wrap, Notes, and Remove. These times use the same time picker and save when the ruler stops. An unset time starts at the day’s general call. Someone removed from the day is listed under Removed from this day, with Include to bring them back.

  • The Locations tab lists the day’s Stops in visit order, with the same Open route for the selected day. Drag a stop by its handle to change the order, except on a day whose Company Move blocks decide where it goes. Click a stop to edit it, and Done to close it. Locations of the kind Base, Hospital, Parking or Other are listed under the stops.

  • Add location: lists the project’s saved locations first, the same ones the project overview shows, with a search for a new address below. Picking a saved location adds that location to the day. A new address also becomes one of the project’s saved locations, and an address a saved location already has adds that one instead of a copy. A location already on the day is not added again: CineFlow says it is already on this day. Add without an address adds an empty location to fill in yourself, for a place the search cannot find, a hospital or a parking area; it does not become a saved location. Each location on the day then has its name, kind (Base, Location, Hospital, Parking, Other), address with autocomplete, an optional map, parking and hospital details, and notes. Every location that has an address gets its Nearest hospital and its nearest parking from CineFlow, with no extra step, however it was added: a new address in Add location, a saved location from before, or an address you type into an empty location afterwards. CineFlow looks them up once from OpenStreetMap, and it finishes even if you close the page; a busy map service can take a minute or two. The hospital is the nearest within 50 km, preferring one with an emergency department. The parking is the nearest car park within 2 km that is open to the public or to customers, never a private one; where the map has no street address for it, its address is its map coordinates, which your maps app opens. An address you type into a location also saves that place with the project’s saved locations. A location with no address, or one of the kind Base, Hospital, Parking or Other, gets neither. Each person can look up 50 a day. CineFlow fills a day’s hospital and parking only where you left them empty. What CineFlow found on its own shows May be inaccurate and © OpenStreetMap under it; change it or press Confirm and it is yours, and CineFlow never replaces it. If you change a location’s address, CineFlow looks up the new place and removes what it had found for the old one, keeping anything you typed. An address the map does not know leaves the location off the map, without the hospital and parking of the old place. If the map service cannot be reached, the location keeps its place, hospital and parking, and CineFlow tries again the next time you edit the address or leave its field. The day’s first located address, in the order the day visits them, drives the weather shown for the day; a day with none uses its call sheet’s address when that was found on the map. The forecast is for the shoot day’s date in that place’s own calendar, so a shoot in Sydney or Tokyo shows that day’s forecast, not the next day’s.

The schedule lists each day as the same card, with its shots under it. Each day’s Roster button opens that day’s roster, with the same tabs and controls, in a sheet from the bottom of the screen.

Shoot days, the day timeline, call times, and the derived roster are the canonical source that callsheets read. Link a callsheet to a shoot day and its schedule, cast, and crew flow in automatically. See the Callsheets guide.

Open the Share popover for the schedule PDF export: pick a Detail level (Compact or Detailed) and Days to include (All days or Custom selection), then Export PDF. The same popover manages the public schedule share link. See Exports and PDFs.

Viewers see the full schedule and roster read only; all editing controls and drag interactions are disabled.