Skip to content

Projects: create, overview, and settings

Entry points: New project beside the title of the dashboard’s Projects zone, or the sidebar plus button when set to New Project.

The Initialize Project wizard has three steps:

  1. Project Name (required), Project Type (Short Film, Feature Film, Documentary, Commercial, Music Video, Series / Episodic, or Custom…), Project Stage (Development, Pre-Production, Production, Post-Production, Distribution, or Custom…).
  2. Shoot Dates (a date range), Director, Director of Photography, and Aspect Ratio (2.39:1, 1.85:1, 16:9, 4:3, 1:1, 9:16, or Custom…). All optional.
  3. A Digital Spec Sheet review. Click Create Project.

You land on the Project Overview. The project’s status pill is derived from the stage you chose (see Projects and workspaces).

If your plan’s project limit is reached, the wizard does not open; an upgrade dialog appears instead. See Billing and usage.

The overview at the project root is a fixed page of blocks, each read from what the project already holds: Calendar, Locations, Weather, Shot progress, Up next and To do. Click a block’s title or its expand button to open it in a larger panel (every block but Up next has one); close the panel with its Close button or Esc. A block with nothing to show yet says so, and editors get a button to start it. Viewers see every block read only.

Switch between Day, Week and Month, and between the Calendar and List layouts; the arrows step back and forward. Each date shows its shoot day with the day’s first location, its call sheet, and the project’s to dos due that day. In the larger panel the scene count of each shoot day shows too, Shoot days jumps to the shoot dates, and the filters Shoot days, Call sheets, Schedule and To dos hide or show each kind. With no shoot days the calendar shows No shoot days, with Add Shoot Day for editors.

Editors can create from the calendar on a computer:

  • Double click a date, or drag across several dates, then choose Shoot day or Task. Add shoot day (or Add 3 shoot days) adds one shoot day per date and skips a date that already has one. Add task adds a task due on the last date.
  • Right click a date for New shoot day, New task, Open callsheet and Open schedule day, and right click a task for Mark done or Mark not done and Delete task.

A map of the project’s locations and each shoot day’s stops, with their count. With none it shows No locations and, for editors, Add location. The larger panel puts the map beside a list:

  • All lists every project location with the days it is on (or Unscheduled). Pick a day to see its stops in visit order, the straight line distance between them, the day’s Call, Wrap and Distance, and Open route. Editors can move a stop up or down, edit it, or remove it.
  • Add location (or Add stop on a day) lists the project’s locations first, then New address, where a new place becomes a project location. On a day, the place you pick is added to that day. From All, each project location has a button (Add to days until it is on one) to tick the shoot days it is on.
  • A stop that is not a project location yet has Link, to join it to a project location or make it a New project location.
  • Under a location, its Nearest hospital and Nearest parking show as on the schedule, with Confirm while CineFlow found them on its own.

The forecast for one place: the temperature now, the conditions, the day’s low and high, the hours ahead, and the week. When the next shoot day has several located stops, each stop gets its own row. The place is your own choice for each project, and nobody else sees it. Open the menu beside the place name to pick:

  • Automatic: the next shoot day’s place, or else the first project location on the map.
  • My location: your device’s position. The browser is asked only when you pick it, and your position is never saved.
  • A place found with Search places, or one of the Project locations.

With no place the block shows No location, with Add location and Choose place, and lists any weather typed on the schedule under Typed on the Schedule. The larger panel shows each day’s Rain, High and Wind with gusts, the Light of the day (blue and golden hours, sunrise and sunset), Rain ahead, and a table of the weather sources with an Estimate across them. The forecast for a shoot day is the same one the schedule and the call sheet show, and weather you type for a day on the schedule replaces it there too.

A ring with the share of the project’s shots marked completed on the Shot List, and a bar for each shoot day with its shots done and planned. A chip counts the shots behind: planned on a past day and not completed. Hover a day’s bar to see its shots, and click it to open that day in the larger panel, which shows Planned to date, Shot, Not shot, Remaining, Scenes done and Days left, a table of every day, and the day’s scenes and shots. With no shots the block shows No shots yet and Start shot list; with shots but no shoot days, No shots scheduled and Add Shoot Day.

The next shoot day: its name and date, Today, Tomorrow or how many days away, Open route, Call, Wrap, Shots and Scenes, its first stops with their times, how many of the crew have confirmed (or Add crew, which opens the day on the schedule), the call sheet’s status, and the day’s weather. Editors can set the call sheet to Draft, Published or Completed from its chip; a call sheet that has never been published opens in its editor to publish. With no shoot day ahead it shows No shoot days or No upcoming shoot days.

The project’s tasks under Today (including anything overdue), Tomorrow and Later (including tasks with no due date). Add task adds one, due on the tab’s day. Click the circle to mark a task done, the title to rename it, the date to change it, and the x to delete it, with Undo. Editors can assign project members to a task. Done tasks shows the completed ones. The larger panel lists them all, with On the calendar (its Show on calendar switch puts the to dos on the Calendar block) and People, how many tasks each person has open.

The overview shows the same blocks in one column, and each opens into the same larger panel.

Open Project Settings from the bottom of the project sidebar. The dialog contains:

  • Cover Image with a Change Cover upload (applied immediately).
  • Project Name (required), Project Type, Project Stage.
  • Time Display: Follow each member’s preference (default), 12-hour for everyone, or 24-hour for everyone. This forces one clock format on callsheets, the schedule, and exported PDFs for every member of the production. See Set the time format.
  • Shoot Dates, Director, Director of Photography, Aspect Ratio.
  • Collaborators who are not the owner see Leave this project with a Leave project button.

Click Save Changes to apply. The status pill updates automatically when you change the stage. You can also change the stage from the dashboard: open the project card menu and choose Stage (see the Dashboard guide).

Note: the shot numbering style is set on the Shot List page (Display then Shot ID style), not in Project Settings. There is no duplicate project action.

These live on the dashboard project card menu. See the Dashboard guide for the exact flows, including the type-to-confirm permanent delete.

Inside a project, the top bar shows the team as stacked avatars with online status dots. Click the stack to manage collaborators; project admins also see a plus button to invite. See Invite a collaborator.